2024-07-24 11:19:32
Analog load cells have slightly different sensitivities when shipped from the factory. Moreover, each sensor has different aging degrees during use, which aggravates the transmission problem. The sensitivity of the sensor is inconsistent, so that the effect of the same measured object. The output signal (data) of each sensor is different. digital scale. The heavy sensor has a unique m...
2024-06-12 14:54:45
The block diagram of the weighing repair control system is shown in Figure 3, which is mainly divided into electrical. Source module, STM32 module, 5 V reference voltage source module, ADC step sampling module, motor drive module, communication module and MCGS human-machine Interface. Function parameters use the modbus RTU protocol, communicated via Module and MCGS industrial touch screen for huma...
2024-06-12 14:40:52
The weight sensor is a type that converts the weight signal into an electronic signal. device. Among them, the bridge load cell consists of four strain gauges. A bridge is formed to sense mechanical deformation and convert it into a voltage difference signal for output. Depend on. Because of its relatively low cost, simple and reliable processing circuit, it is a wide range of applications. ...
2024-05-05 14:37:46
Abstract: In view of the content and characteristics of the teaching of the "Sensor Application and Technology" course, the course team conducted in-depth research and analysis on the teaching of this course, and proposed three aspects: the determination of teaching content, the implementation of the teaching process, and the sustainable development of the course. reform measures. "Sensor Applicat...
2024-04-15 16:29:15
With the increasing frequency of economic activities , the scales are gradually levelled by levers The principle of mechanical weighing is fast, accurate, continuous, automatic and other advantages set one The body is replaced by an electronic weighing device. Where the use of the "force - electricity" transformation principle will The measuring instruments of the weighing device for converting...
2024-04-15 16:24:02
The electronic truck scale mainly realizes the transformation of force and electricity A weighing device that converts non-electric gravity into electric power, in order to be sure To ensure the smooth realization of this function, it is inseparable from the important installation of the load cell It is located on the fulcrum of the weighing table and needs to have a variety of good The mechanical...
2024-03-12 14:55:11
Infrared anti-cheating technology. It is more common to use the docking position to cheat. During the weight inspection process. When weighing the car, press part of the car against the sensor of the electronic truck scale. Both ends or sides to reduce the weight of the car and achieve the purpose of cheating. Generally. In this case, due to the viewing angle error, it is difficult for the in...
2024-02-19 16:58:40
The digital electronic truck scale weighing sensor system is based on traditional analog sensors and integrates modern microelectronics technology and microcomputer. An electronic weighing technology developed from computer technology. This article focuses on two types of weighing sensors through data analysis. The impact of performance differences on cost performance, stability, accuracy, et...
2024-01-11 13:43:59
Functionally speaking, the communication functions of smart sensors are the same as It also covers logical thinking, information judgment, information processing. Functions such as information detection provide technical support for later artificial intelligence, technical support. Smart sensors are equipped with microprocessors that can store. Process and judge information, with automatic c...
2023-09-18 14:44:31
Abstract: The performance differences of different types of weighing sensors have a great impact on the use of electronic truck scales. By comparing the performance of analog weighing sensors and digital weighing sensors. Comparing price, stability and accuracy, digital load cells are better than analog load cells in terms of stability and accuracy. It is recommended to use digital load cells. Tru...
