Infrared anti-cheating technology. It is more common to use the docking position to cheat. During the weight inspection process. When weighing the car, press part of the car against the sensor of the electronic truck scale. Both ends or sides to reduce the weight of the car and achieve the purpose of cheating. Generally. In this case, due to the viewing angle error, it is difficult for the inspector to fully see the vehicle on the electric. The specific stop location of the truck scale. Faced with this common cheating situation, you can use. Infrared detection technology monitors the position of the car by using two. Group switches and arrange them vertically to continuously improve the detection range and density. If the car is parked illegally during the weighing process, you can use the red. The external anti-cheating technology issues an alarm prompt, prompting the driver of the weighing vehicle to readjust. The location of the entire vehicle can effectively prevent cheating.

video surveillance technology. When checking the weight of the vehicle, add more people or carry items to lift the vehicle for weighing. After the detection is completed, unload items or transfer personnel in a timely manner to achieve the purpose of cheating purpose. At this time, by applying video surveillance technology, the entire weighing vehicle can be monitored. The scene of the process is filmed in all directions to avoid the occurrence of problems during the weight inspection process. Improper behavior and reduce the possibility of cheating. At the same time, the inspectors also. The recorded image information can be stored in time and can be viewed and retrieved at any time to achieve weight inspection. Real-time supervision and management of the process can also be used as evidence when necessary to comprehensively. This serves the purpose of preventing cheating.

Cheating is carried out by installing electronic remote control devices, mainly through. A pulse generator device is installed in the middle of the connecting line of the truck scale sensor. Application. The remote control device changes the pulse signal and changes the value displayed on the instrument. To achieve the purpose of increasing or decreasing the weighing amount.

 To sum up, in industrial control, electrical equipment and automation instruments are mutually dependent function, working together. In the actual process of production or work, both. Effective cooperation can ensure the refinement and specialization of industrial equipment, and also. It can ensure the safety and reliability of industrial system operation. At the same time, the system is in progress. In the process of system design, we should also actively pay attention to the production environment to form intelligent. Professional equipment allows industrial control to work better.